506th IR Realism Unit

Recruiting => The Duty Desk => Topic started by: Janow on March 05, 2015, 07:30:31 PM

Title: Issue: Cannot load mission [RESOLVED]
Post by: Janow on March 05, 2015, 07:30:31 PM: Hey everyone,

After installing everything that is required for the recruit training session tomorrow, I get this msg. when loading up Arma 3.
Just wondering if anyone else has experienced this, or if this is normal behavior.

As far as I can tell, all mods from the repository have been installed and updated correctly.
Using ArmA3Sync everything shows green and ok.

Here is a screenshot of the error.
https://www.dropbox.com/s/uayi7wvut2ok2um/2015-03-05_00002.jpg?dl=0 (https://www.dropbox.com/s/uayi7wvut2ok2um/2015-03-05_00002.jpg?dl=0)

Just want to make sure I'll be able to attend tomorrow's training.

Thank You,
RCT Janow

UPDATE:
In case someone else gets this same notification.
I was able to successfully complete the recruit training and join the server. Still not sure why I'm getting this notification but it does not seem to be affecting anything.
Title: Re: Issue: Cannot load mission
Post by: PFC (Ret) Grimes on March 05, 2015, 07:53:26 PM: While I do not know exactly what is causing that, I know most of the problems I have encountered in ARMA have been mod related. Could you post a pic of your mod selections in the ArmaA3Sync screen, like this?
http://i.imgur.com/kprLzzu.jpg
Title: Re: Issue: Cannot load mission
Post by: Janow on March 05, 2015, 08:00:00 PM: I sure can!

Addon Screen
https://www.dropbox.com/s/crdhq0q8zmhw49y/C1.PNG?dl=0 (https://www.dropbox.com/s/crdhq0q8zmhw49y/C1.PNG?dl=0)

Repository Screen
https://www.dropbox.com/s/2cpg7caamnworok/C2.PNG?dl=0 (https://www.dropbox.com/s/2cpg7caamnworok/C2.PNG?dl=0)

Thanks
Title: Re: Issue: Cannot load mission
Post by: E. Ray on March 05, 2015, 08:02:23 PM: I'm receiving the exact same error message. I've only installed the mods listed in the Mod Depot (http://www.506thir.net/forums/index.php?topic=611.0) thread. However, I notice the thread was very recently (last night?) edited with some updates. I'll install those and report back.
Title: Re: Issue: Cannot load mission
Post by: CPT Hammersmain on March 05, 2015, 08:04:50 PM: Janow -- feel free to find me in Havoc 1-2-A channel on TS...It's -10F outside, i'm bored, single, and have no life...But I do have TeamViewer so i can snoop around your game and see if i can see anything out of the ordinary.

edit -- same offer goes to you, rms141
Title: Re: Issue: Cannot load mission
Post by: Maple on March 05, 2015, 08:06:04 PM: Are both of you using the repository?
Title: Re: Issue: Cannot load mission
Post by: E. Ray on March 05, 2015, 08:10:28 PM: Quote from: WO1 Wilde on March 05, 2015, 08:06:04 PM
Are both of you using the repository?

I have the repository loaded in ArmA3Sync. The optional addons repository reports status OK, the member repository system reports "-". I've installed my mods manually through direct download from the mod thread.
Title: Re: Issue: Cannot load mission
Post by: Janow on March 05, 2015, 08:23:54 PM: Quote from: WO1 Wilde on March 05, 2015, 08:06:04 PM
Are both of you using the repository?

Yes I used the repository last night.

Quote from: PV2 Hammersmain on March 05, 2015, 08:04:50 PM
Janow -- feel free to find me in Havoc 1-2-A channel on TS...It's -10F outside, i'm bored, single, and have no life...But I do have TeamViewer so i can snoop around your game and see if i can see anything out of the ordinary.

edit -- same offer goes to you, rms141

Thanks Hammersmain, but I won't be able to jump into TS until later this evening.
Title: Re: Issue: Cannot load mission
Post by: Janow on March 05, 2015, 08:42:51 PM: When I remove Podagorsk addon everything runs fine.

So I re-downloaded that file but still had the same error come up.
I also re-downloaded the allinarmaterrain pack and the updates + patch and still no luck.
Title: Re: Issue: Cannot load mission
Post by: PFC (Ret) Grimes on March 05, 2015, 08:45:49 PM: Double check and make sure your repository is 100% up to date and turn off the cTab in your mods. Its included in the 506th pack, so you shouldn't need it. Other then that, I don't know what the problem is. You downloaded Podagorsk through the repository?
Title: Re: Issue: Cannot load mission
Post by: Janow on March 05, 2015, 09:43:08 PM: Quote from: PV2 Grimes on March 05, 2015, 08:45:49 PM
Double check and make sure your repository is 100% up to date and turn off the cTab in your mods. Its included in the 506th pack, so you shouldn't need it. Other then that, I don't know what the problem is. You downloaded Podagorsk through the repository?

Repository 100%
Turned off cTab.

Just to make sure I removed Podagorsk and am downloading again through the repository.
For some reason only getting 80-90 kbps from the repository, so this may take awhile! Slow download is not on my side.

I'll update and see if it works after repository finishes.
Title: Re: Issue: Cannot load mission
Post by: Janow on March 05, 2015, 10:24:16 PM: Quote from: PV2 Grimes on March 05, 2015, 08:45:49 PM
Double check and make sure your repository is 100% up to date and turn off the cTab in your mods. Its included in the 506th pack, so you shouldn't need it. Other then that, I don't know what the problem is. You downloaded Podagorsk through the repository?

Repository just finished. Everything is green and 100%.
Everything was downloaded through the repository.

Still the same problem.
I launch arma3 from ArmA3Sync and when the game is loaded up I get cannot load mission msg.

Keep in mind I'm not sure what mission it's talking about. For all i know it could be talking about a scenario I played or something.
I can still play the game and everything just fine.
I'm not sure if there is a server I can test the 506th recruit mods out on?