Author Topic: Issue: Cannot load mission [RESOLVED]  (Read 9720 times)

Janow

  • Posts: 9
Issue: Cannot load mission [RESOLVED]
« on: March 05, 2015, 07:30:31 PM »
Hey everyone,

After installing everything that is required for the recruit training session tomorrow, I get this msg. when loading up Arma 3.
Just wondering if anyone else has experienced this, or if this is normal behavior.

As far as I can tell, all mods from the repository have been installed and updated correctly.
Using ArmA3Sync everything shows green and ok.

Here is a screenshot of the error.
https://www.dropbox.com/s/uayi7wvut2ok2um/2015-03-05_00002.jpg?dl=0

Just want to make sure I'll be able to attend tomorrow's training.

Thank You,
RCT Janow

UPDATE:
In case someone else gets this same notification.
I was able to successfully complete the recruit training and join the server. Still not sure why I'm getting this notification but it does not seem to be affecting anything.
« Last Edit: March 06, 2015, 10:20:00 PM by Janow »

PFC (Ret) Grimes

  • 68W Health Care Specialist
  • Retired
  • Posts: 8
Re: Issue: Cannot load mission
« Reply #1 on: March 05, 2015, 07:53:26 PM »
While I do not know exactly what is causing that, I know most of the problems I have encountered in ARMA have been mod related. Could you post a pic of your mod selections in the ArmaA3Sync screen, like this?
http://i.imgur.com/kprLzzu.jpg
A. GRIMES
PFC, USA
Retired

Janow

  • Posts: 9
Re: Issue: Cannot load mission
« Reply #2 on: March 05, 2015, 08:00:00 PM »

E. Ray

  • Posts: 136
Re: Issue: Cannot load mission
« Reply #3 on: March 05, 2015, 08:02:23 PM »
I'm receiving the exact same error message. I've only installed the mods listed in the Mod Depot thread. However, I notice the thread was very recently (last night?) edited with some updates. I'll install those and report back.

CPT Hammersmain

  • 11A Infantry Officer
  • Combat Element
  • Posts: 2618
Re: Issue: Cannot load mission
« Reply #4 on: March 05, 2015, 08:04:50 PM »
Janow -- feel free to find me in Havoc 1-2-A channel on TS...It's -10F outside, i'm bored, single, and have no life...But I do have TeamViewer so i can snoop around your game and see if i can see anything out of the ordinary. 

edit -- same offer goes to you, rms141
R. HAMMERSMAIN
CPT, USA
Reserve Platoon, 1-506 Infantry


Maple

  • Posts: 161
Re: Issue: Cannot load mission
« Reply #5 on: March 05, 2015, 08:06:04 PM »
Are both of you using the repository?

E. Ray

  • Posts: 136
Re: Issue: Cannot load mission
« Reply #6 on: March 05, 2015, 08:10:28 PM »
Are both of you using the repository?

I have the repository loaded in ArmA3Sync. The optional addons repository reports status OK, the member repository system reports "-". I've installed my mods manually through direct download from the mod thread.

Janow

  • Posts: 9
Re: Issue: Cannot load mission
« Reply #7 on: March 05, 2015, 08:23:54 PM »
Are both of you using the repository?

Yes I used the repository last night.

Janow -- feel free to find me in Havoc 1-2-A channel on TS...It's -10F outside, i'm bored, single, and have no life...But I do have TeamViewer so i can snoop around your game and see if i can see anything out of the ordinary. 

edit -- same offer goes to you, rms141

Thanks Hammersmain, but I won't be able to jump into TS until later this evening.
« Last Edit: March 05, 2015, 08:35:57 PM by Janow »

Janow

  • Posts: 9
Re: Issue: Cannot load mission
« Reply #8 on: March 05, 2015, 08:42:51 PM »
When I remove Podagorsk addon everything runs fine.

So I re-downloaded that file but still had the same error come up.
I also re-downloaded the allinarmaterrain pack and the updates + patch and still no luck.

PFC (Ret) Grimes

  • 68W Health Care Specialist
  • Retired
  • Posts: 8
Re: Issue: Cannot load mission
« Reply #9 on: March 05, 2015, 08:45:49 PM »
Double check and make sure your repository is 100% up to date and turn off the cTab in your mods. Its included in the 506th pack, so you shouldn't need it. Other then that, I don't know what the problem is. You downloaded Podagorsk through the repository?
A. GRIMES
PFC, USA
Retired

Janow

  • Posts: 9
Re: Issue: Cannot load mission
« Reply #10 on: March 05, 2015, 09:43:08 PM »
Double check and make sure your repository is 100% up to date and turn off the cTab in your mods. Its included in the 506th pack, so you shouldn't need it. Other then that, I don't know what the problem is. You downloaded Podagorsk through the repository?

Repository 100%
Turned off cTab.

Just to make sure I removed Podagorsk and am downloading again through the repository.
For some reason only getting 80-90 kbps from the repository, so this may take awhile! Slow download is not on my side.

I'll update and see if it works after repository finishes.

Janow

  • Posts: 9
Re: Issue: Cannot load mission
« Reply #11 on: March 05, 2015, 10:24:16 PM »
Double check and make sure your repository is 100% up to date and turn off the cTab in your mods. Its included in the 506th pack, so you shouldn't need it. Other then that, I don't know what the problem is. You downloaded Podagorsk through the repository?

Repository just finished. Everything is green and 100%.
Everything was downloaded through the repository.

Still the same problem.
I launch arma3 from ArmA3Sync and when the game is loaded up I get cannot load mission msg.

Keep in mind I'm not sure what mission it's talking about. For all i know it could be talking about a scenario I played or something.
I can still play the game and everything just fine.
I'm not sure if there is a server I can test the 506th recruit mods out on?
« Last Edit: March 05, 2015, 10:56:47 PM by Janow »